Circular Panel Saw 260

TECHNICAL DATA:

• Main motor (saw blade)  Kw (Hp)  4 (5,5)
• Scorer motor  Kw (Hp)  0,55 (0,75)
• Overall dimensions of the carriage  mm  2600×340
• Length of cut from the scorer’s blade  mm 2600
• Capacity of cutting saw blade/fencemm 1250
• Overall dimensions of fixed cast iron table  mm  840X530
• Ø saw blade mm  300 – 350
• Ø scorer blade  mm  100
• Height of cut with Ø 300 (Ø 350) blade at 90°  mm 95 (120)
• Rotation speed of the saw blade shaft  g/1’ 4500
• Rotation speed of the scorer shaft g/1’ 8700
• 2 suction hoods for connection to the suction system   60/100
• Net weight kg  600

STANDARD EQUIPMENT:

• Scoring unit with independent motor
•   Manual delta/start switch
•   Anodized alu carriage
•   Gauge for the tilting saw blade
•   Saw protection type ‘ALFA’
•   Squaring fence with goniometer for wide cutting angles
•   Mitre fence (600 mm) with goniometer for small cutting angles
•   Goniometer with fixed positions at 7,5° – 15° – 18° – 22,5° – 30° – 36° – 45°
•   Clamping device
•   Wide out-feeding table extension
•   Maintenance manual and spanners

EQUIP. – “CE” SAFETY REGULATIONS:

•   Self-braking motor
•   Low tension electric system
•   Support for the suction tube

OPTIONS ON DEMAND:

• Saw protection with suction installation (compulsory for CE version with a Ø 350 mm saw blade)
• Carriage of 3200 x 420 mm sliding with ball-bearings
• Carriage of 3200 x 420 mm sliding by a rolls’ system on rectified bars
• Motor HP 7,5
• 1-phase motors (saw blade HP 3; scorer blade HP 0,75)
• Widia scoring blade Ø 100 mm
• Widia saw blade Ø 350 mm
• Cutting capacity saw blade/fence up to 1.500 mm
• Rise & fall of the blade by means of a frontal hand-wheel
• Extensible roll at table’s extension
• Digital reader by battery on squaring fence
• Stop of the carriage at any position
• Packing: structure including 2 pieces of machines superposed
• Powered tilting of the saw blade
• Powered up / down of the saw blade