One way miter cutting (from 0 degree to 60 degrees).
Cast-iron saw frame on twin tapered bearings and ring nut to provide greater stability.
Precision blade-guide with bearings and anti-corrosion treatment. Two cutting speeds. Vice with quick lock lever.
Cutting cycle: vice locking of material to cut - the saw band runs as long as the operator holds the gripswitch - manual pull down of the sawframe.
TECHNICAL FEATURES AND CUTTING CAPACITY:
Machine bed in thick metal works exclusively made by domestic workshops. High level machining and finishing of the parts.
Vice and sawframe in cast-iron providing high stability and vibration free cutting. Mechanical blade tension with handwheel.
Precision blade-guide with roller bearings. Anti-corrosion treatment with electrolytic nickel-plating and galvanization zinc plating ensure long lasting cutting precision. Electric motor and reduction unit from domestic ISO certificated manufacturers.
Electric installation according CEE regulations. Set of fuses against current overload. Motor protected thermal feeler. Safety microswitch on the blade protection. Coolant liquid with electropump and crucible. Severe tests on mechanical tolerances, electric installation and final performance test.
If you have questions about our products, do not hesitate to contact our Support Team by e-mail.
Address: S.S. 554 km 4,200 Selargius (CA) - Italy - Phone: +39.070.572228 - E-mail: firstname.lastname@example.org - Vat reg number: 03014710929