Canvas Cork for Flywheel Band Saw - Width: 50mm


"SPECIAL OFFER"

Width: 50mm - Canvas Cork for Flywheel Band Saw

 

Measure:  6 meters- Width: 50mm 

 

Useful tips:

 

  • Remove old corks with thinner and with abrasive paper.
  • Apply bostik evenly both to the flywheels and to the inside of the cork using a spatula or brush.
  • Wait the necessary time before gluing following the instructions for use of the product.
  • Glue the corkies making a 45 ° cut in the initial part and close by cutting at 45 ° but in the opposite direction the part to be joined.
  • Wait the time necessary for drying (See Bostik instructions)
  •  Chamfer with sandpaper the edge of the corks.
57,00 €

42,00 €

  • 1 kg
  • Available - Disponible
  • delivery in 1-5 working days for Europe + 1-2 for America, Australia, Asia and Africa - Expédition sous 1-5 jours ouvrés1

Width: 50mm - Canvas Cork for Flywheel Band Saw

 

Measure:  12 meters- Width: 50mm 

 

Useful tips:

 

  • Remove old corks with thinner and with abrasive paper.
  • Apply bostik evenly both to the flywheels and to the inside of the cork using a spatula or brush.
  • Wait the necessary time before gluing following the instructions for use of the product.
  • Glue the corkies making a 45 ° cut in the initial part and close by cutting at 45 ° but in the opposite direction the part to be joined.
  • Wait the time necessary for drying (See Bostik instructions)
  •  Chamfer with sandpaper the edge of the corks.
114,00 €

75,00 €

  • 1 kg
  • Available - Disponible
  • delivery in 1-5 working days for Europe + 1-2 for America, Australia, Asia and Africa - Expédition sous 1-5 jours ouvrés1

Canvas Cork for Flywheel Band Saw - Width: 40mm


Width: 40mm - Canvas Cork for Flywheel Band Saw

 

Measure:  5,5 meters - Width: 40mm 

 

Useful tips:

 

  • Remove old corks with thinner and with abrasive paper.
  • Apply bostik evenly both to the flywheels and to the inside of the cork using a spatula or brush.
  • Wait the necessary time before gluing following the instructions for use of the product.
  • Glue the corkies making a 45 ° cut in the initial part and close by cutting at 45 ° but in the opposite direction the part to be joined.
  • Wait the time necessary for drying (See Bostik instructions)
  •  Chamfer with sandpaper the edge of the corks.
54,00 €

48,00 €

  • 1 kg
  • Available - Disponible
  • delivery in 5-9 working days for Europe + 1-2 for America, Australia, Asia and Africa - Expédition sous 5-9 jours ouvrés1

Width: 40mm - Canvas Cork for Flywheel Band Saw

 

Measure:  11 meters - Width: 40mm 

 

Useful tips:

 

  • Remove old corks with thinner and with abrasive paper.
  • Apply bostik evenly both to the flywheels and to the inside of the cork using a spatula or brush.
  • Wait the necessary time before gluing following the instructions for use of the product.
  • Glue the corkies making a 45 ° cut in the initial part and close by cutting at 45 ° but in the opposite direction the part to be joined.
  • Wait the time necessary for drying (See Bostik instructions)
  •  Chamfer with sandpaper the edge of the corks.
108,00 €

75,00 €

  • 2 kg
  • Available - Disponible
  • delivery in 1-5 working days for Europe + 1-2 for America, Australia, Asia and Africa - Expédition sous 1-5 jours ouvrés1