Designed for shaping the edges of longitudinal beams and crossbeams and modelling coffered ceilings.

Factory-fitted with straight blades for bevel-edging, ti also permits rounding or moulding of shapes by using the moulding blades included with the equipment or the optional blades set.

The width of the straight or moulded profile obtained can be set between 0 and 40 mm.

The guide on which the piece to be shaped rests can be moved with respect to the cutter, which means that different profiles can be made on an edge, according to the zone of the blade on which work is being done.

There are two handles, one parallel to the main grip and at the same level, permitting comfortable work on longitudinal beams and vertical parts, and a top knob with two optional positions for work on horizontal surfaces, thus in both cases allowing a perfectly comfortable and secure two-handed grip on the machine.

The machine is equipped with a smooth electronic starting system and safety connection cutt-off switch to avoid undesired start-up. It is also equipped with a dust collection nozzle.

Specifications:

• Input power 1,300 W
• Maximum cutting width 40/20 mm
• No-load speed 23,000/min
• Max. blades pitch diameter 49 mm
• Weight 4.9 kg

 Blades and cutter-holders (included with standard equipment):

• 9841004 Set of two carbide straight blades 
• 9845239 Cutter-holder for straight blades
• 9841006 Set of two carbide moulding blades
• 9845273 Cutter-holder for moulding blades

Blades and cutter-holders (optionals):

• 9841005 Edge rounding or cutting on radius. Set of two carbide blades for 1/4 R=5, 10 & 15  - Price: 125,00
• 9845270 Cutter-holder 1/4 R=5, 10 & 15   - Price: 49,00
• 9841010 Set of two carbide blades for 1/4 R=25   - Price: 125,00
• 9845271 Cutter-holder 1/4 R=25  - Price: 49,00
• 9841011 Set of two carbide blades for 1/2 R=4,5 & 7   - Price: 125,00
• 9845272 Cutter-holder 1/2 R=4,5 & 7 - Price: 49,00

Blades and cutter-holders (optionals):

• 9841012 Set of two carbide blades R=25  - Price: 125,00
• 9845332 Cutter-holder R=25  - Price: 49,00
• 9841013 Set of two carbide blades R=20/90° - Price: 125,00
• 9845333 Cutter-holder R=20/90°  - Price: 49,00
• 9841014 Set of two carbide blades R=10 and 10 - Price: 125,00
• 9845334 Cutter-holder R=10 and 10  - Price: 49,00
• 9841015 Set of two carbide blades R=5, 20 and 5 180° - Price: 125,00
• 9845335 Cutter-holders R=5, 20 and 5 180°  - Price: 49,00
• 9841016 Set of two carbide blades R= -20 - Price: 125,00
• 9845336 Cutter-holder R= -20  - Price: 49,00
• 9841017 Set of two carbide blades R= -7,7,7 y -7 - Price: 125,00
• 9845337 Cutter-holder R= -7,7,7 and -7  - Price: 49,00

Optional accessories:

• 9800150 Radius copier. Allows straight chamfered edges to be made on pieces with exterior circular curves
• 6446073 Standard dust collector connection 2.25 m  - Price: 56,00
• 1746245 Standard dust collector attachment 5 m   - Price: 65,00
• 9800050 Base with guide extension  - Price: 215,00

Designed for shaping the edges of longitudinal beams and crossbeams and modelling coffered ceilings.

Factory-fitted with straight blades for bevel-edging, ti also permits rounding or moulding of shapes by using the moulding blades included with the equipment or the optional blades set.

The width of the straight or moulded profile obtained can be set between 0 and 40 mm.

The guide on which the piece to be shaped rests can be moved with respect to the cutter, which means that different profiles can be made on an edge, according to the zone of the blade on which work is being done.

There are two handles, one parallel to the main grip and at the same level, permitting comfortable work on longitudinal beams and vertical parts, and a top knob with two optional positions for work on horizontal surfaces, thus in both cases allowing a perfectly comfortable and secure two-handed grip on the machine.

The machine is equipped with a smooth electronic starting system and safety connection cutt-off switch to avoid undesired start-up. It is also equipped with a dust collection nozzle.

Specifications:

• Input power 1,300 W
• Maximum cutting width 40/20 mm
• No-load speed 23,000/min
• Max. blades pitch diameter 49 mm
• Weight 4.9 kg

 Blades and cutter-holders (all included): 

• 9841004 Set of two carbide straight blades 
• 9845239 Cutter-holder for straight blades
• 9841006 Set of two carbide moulding blades
• 9845273 Cutter-holder for moulding blades

• 9841005 Edge rounding or cutting on radius. Set of two carbide blades for 1/4 R=5, 10 & 15 
• 9845270 Cutter-holder 1/4 R=5, 10 & 15  
• 9841010 Set of two carbide blades for 1/4 R=25 
• 9845271 Cutter-holder 1/4 R=25 
• 9841011 Set of two carbide blades for 1/2 R=4,5 & 7 
• 9845272 Cutter-holder 1/2 R=4,5 & 7

• 9841012 Set of two carbide blades R=25
• 9845332 Cutter-holder R=25
• 9841013 Set of two carbide blades R=20/90°
• 9845333 Cutter-holder R=20/90°
• 9841014 Set of two carbide blades R=10 and 10
• 9845334 Cutter-holder R=10 and 10
• 9841015 Set of two carbide blades R=5, 20 and 5 180°
• 9845335 Cutter-holders R=5, 20 and 5 180°
• 9841016 Set of two carbide blades R= -20
• 9845336 Cutter-holder R= -20 
• 9841017 Set of two carbide blades R= -7,7,7 y -7 
• 9845337 Cutter-holder R= -7,7,7 and -7 

   

   

• 9800150 Radius copier. Allows straight chamfered edges to be made on pieces with exterior circular curves
• 6446073 Standard dust collector connection 2.25 m  
• 1746245 Standard dust collector attachment 5 m   
• 9800050 Base with guide extension