SALE UP TO 50% OFF

Length: 1752 - Width: 8 - Thickness: 0,6 

• Suitable for Mafell Z3 and Z5 Carpenter's Portable Bandsaws
• Double Sided Bandsaw Blades. Hardened and tempered teeth, guarantees highest performance. 
• Cleanest cut, ideal for all types of wood, including hardwood.

Diameter : 80 - Bore : 30 (max 40mm) - Length:120

TECHNICAL DATA:

• Motor power HP (KW) 2 (1,5)
• Cast iron fly-wheels Ø mm 400
• Fly-wheel’s width mm 25
• Cutting width mm 390
• Max cutting height mm 280
• Blade width mm 6 ÷ 25
• Blade’s speed m/sec 18
• Overall dimensions of the cast iron table mm 500 X 450
• Net weight kg 125

STANDARD EQUIPMENT:

• 3-phase motor
• Tilting cast iron table 0° ÷ 45°
• Saw blade
• Adjusting top saw blade guide
• Electric system with overload protection
• Micro switch on the doors
• Maintenance manual + spanners

EQUIP. – “CE” SAFETY REGULATIONS:

• Electric system according to norms
• Self-braking electronic system
• Safety protections according to norms
• Top saw blade guide with rack movement
• Tilting cast iron table 0°÷20°

 OPTIONS ON DEMAND:

• 3-phase motor HP 3
• 1-phase motor HP 2
• 1-phase motor HP 2,5
• Extra saw blade
• Professional top saw blade guide 
• Adjustable bottom saw blade guide
• Professional bottom saw blade guide 
• Mitre quadrant
• Wheels for manual displacement the machine
• Wheels for manual displacement the machine with a shaft
• Compass
• Curve catch
• Sanding fence
• Top saw blade guide with rack movement

Diameter : 80 - Bore : 30 (max 40mm) - Length:120

Diameter : 100 - Bore : 50  - Length:120

Diameter : 450 - Teeth : 108 - Bore : 32 (30 on demand) - Thickness: 4.0 (Pin holes: 2/11/63)

• For cutting of sections and the tubular thickness from 2 to 5 millimeters of aluminum, PVC and non-ferrous metals .
• They use it on miter saws and table saws .
• No-noise sawblades with a special sound absorbing resin inside the silent slots.

Use fine-toothed blades to cut sheet and pipes (Iron profiles)

Length: 1437 - Width: 13 - Thickness: 0,6  - Vari-tooth:  8/12

On demand: 6/10 - 10/14

• HOLZMANN BS125M_230V
• FERVI 0362
• COMPA SC 1435
• Güde MBS 125 V 
• NEBES TM125
• FEMI 784 XL
• NG120 XL
• ABS NG120
• STAYER SN1435
• LTF OPTIMUM SP 13V
• THOMAS STH1

Diameter : 350 - Teeth : 80 - Bore : 30  - Thickness: 2.6/2.0  

Not suitable for cutting stainless steel. 

The radial arm saws offer adaptability, versatility, precision and durability to shops of all sizes.

Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. 

The number of different operations that can be performed with a radial-arm saw are amazing. While it is mainly a crosscut saw, it can be used to rip, cut bevels or miters, dadoes and rabbets, form moldings.

TECHNICAL DATA: 

• Motor power KW(HP)  3(4)
• Standard blade Ø  mm  400
• Hole Ø  mm  30
• Intake opening on blade guard Ø mm  60
• 50Hz motor’s  rotation speed  g/1’  2.800
• Max. cutting width with  Ø 400 blade  mm  870
• Max. cutting height with Ø 400 blade   mm  125
• N° carriage bearings  8
• Net weight  kg  270
• Gross weight kg  330

 STANDARD EQUIPMENT:

• 0 – 1 starter
• Packing in carton box
• Intake opening on blade guard
• Blade guard with anti-noise system for Ø 400 blade
• Maintenance manual

EQUIP. – “CE” SAFETY REGULATIONS:

• Self-braking motor
• Electric installation according to norms
• Device for air suction with Ø 100mm hood

OPTIONS ON DEMAND:

• Automatic return spring (for no CE version)
• Assembled machine
• Overload protection (in case of no CE version)
• Frontal arm lifting

• Heavy-steel cutter for locks
• Suitable for plunging and sizing soft and hard solid woods.
• For normal or CNC overhead machines.

The radial arm saws offer adaptability, versatility, precision and durability to shops of all sizes.

Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. 

The number of different operations that can be performed with a radial-arm saw are amazing. While it is mainly a crosscut saw, it can be used to rip, cut bevels or miters, dadoes and rabbets, form moldings.

TECHNICAL DATA: 

• Motor power KW(HP)  3(4)
• Standard blade Ø  mm  400
• Hole Ø mm  30
• Intake opening on blade guard Ø mm  60
• 50Hz motor’s  rotation speed g/1’  2.800
• Max. cutting width with  Ø 400 blade  mm  710
• Max. cutting height with Ø 400 blade  mm  125
• N° carriage bearings 8
• Net weight kg  200
• Gross weight  kg  250

 STANDARD EQUIPMENT:

•  0 – 1 starter
• Packing in carton box
• Intake opening on blade guard
• Blade guard with anti-noise system for Ø 400 blade
• Maintenance manual

EQUIP. – “CE” SAFETY REGULATIONS:

• Self-braking motor
• Electric installation according to norms
• Device for air suction with Ø 100mm hood

OPTIONS ON DEMAND:

• Automatic return spring (for no CE version)
• Assembled machine
• Overload protection (in case of no CE version)
• Frontal arm lifting

Diameter : 180 - Teeth : 2+2 HW - Bore : 30 or 35

• Cutterhead for multi-profiles ashlars with right rotation

Parquet Flooring

Diameter : 300 - Teeth : 72WZ - Bore : 30 (35 on demand) - Thickness: 3.2

• For cutting across grain of exotic timber and hardwood, single sided veneer, laminate boards and plastic coated materials.
• Suitable for table saws and panels saws.
• Suitable for particle board in stack.
• No-noise sawblades.

Diameter : 300 - Teeth : 72TP - Bore : 30 (35 on demand) - Thickness: 3.2

• For cutting hardwoods, double sided veneer and laminate board, MDF, hard paper and thermoplastic boards.
• Extra finish and long cutting life.
• Ideal for working Alucobond, Parquet laminate flooring.
• For table saws.
• Mitre Saw Table 

Diameter : 400 - Teeth : 84 - Bore : 30  - Thickness: 3.0/2.2 

Not suitable for cutting stainless steel. 

Diameter : 500 - Teeth : 120 - Bore : 32 (30 on demand) - Thickness: 4.6 (Pin holes: 2/11/63)

• For cutting of sections and the tubular thickness from 2 to 5 millimeters of aluminum, PVC and non-ferrous metals .
• They use it on miter saws and table saws .
• No-noise sawblades with a special sound absorbing resin inside the silent slots.

Diameter : 250 - Teeth : 60TP - Bore : 30 (35 on demand) - Thickness: 3.2

• For cutting hardwoods, double sided veneer and laminate board, MDF, hard paper and thermoplastic boards.
• Extra finish and long cutting life.
• Ideal for working Alucobond, Parquet laminate flooring.
• For table saws.
• Mitre Saw Table 

Two ways miter cutting (45°-0°- 60°).

New round working table providing precision mitering, yet preventing the sawband to scratch its surface as the cut is completed.

Cast-iron sawframe on twin tapered bearings and ring nut to provide greater stability.

Precision blade-guide with hard metal pads, bearings and anti-corosion treatement.

Two cutting speeds.

Vice with quick lock lever.

Cutting cycle: vice locking of material to cut - the sawband runs as long as the operator holds the gripswitch - manual pull down of the sawframe.

TECHNICAL FEATURES AND CUTTING CAPACITY:

Machine bed in thick metal works exclusively made by domestic workshops. High level machining and finishing of the parts. Vice and sawframe in cast-iron providing high stability and vibration free cutting.

Side-to-side mobile vice with quick approach lever. New round working table providing precision mitering, yet preventing the sawband to scratch its surface as the cut is completed.

Designed to avoid rust seizure and chips jamming. Mechanical blade tension with handwheel. Precision blade-guide with hard metal pads and roller bearings.

Anti-corrosion treatement with electrolytic nickel-plating and galvanization zinc plating ensure long lasting cutting precision. Electric motor and reduction unit from domestic ISO certificated manufacturers.

Electric installation according CEE. Set of fuses against current overload. Motor protected thermal feeler.

Safety microswitch on the blade protection. Coolant liquid with electropump and crucible.

Severe tests on mechanical tolerances, electric installation and final performance test.

STANDARD EQUIPMENT:

• Certificate of conformity and instruction manual according to Machine Directive 2006
• Set of service spanners.
• Bar stop.
• Material support.
• Bi-metal bandsaw 2750x27x0,9.

OPTIONAL EQUIPMENT:

DUAL-MODE: sawframe downfeed selection system:

• Manual downfeed.
• Gravity downfeed with adjustable speed.
• PNEUMATIC VICE: automatic locking and opening of the vice.
• Rollerway 2 meters long on loading side (capacity 240 kg).
• Rollerway 2 meters long on unloading side (capacity 240 kg) with bar stop.
• Rollerway 2 meters long on loading side (capacity 1000 kg).
• Rollerway 2 meters long on unloading side (capacity 1000 kg) with bar stop.

TECHNICAL SUPPORT:

• Technical support from the local service centre.
• Spare parts delivery is guaranteed for 10 year from the construction date.

TECHNICAL DATA:

• 3Ph Electric motor kW 1.0 - 1.4
• Electropump kW 0.07
• Gearbox reduction ratio I 40/1
• Flywheel diameter mm 300
• Blade dimension mm 2750 x 27 x 0,9
• Cutting speed m/1' 33/66
• Vice opening mm 305
• Sawframe inclination ° 30
• Working height mm 940
• Machine dimension mm 1200 x 2000 x 1950
• Weight kg 440

Diameter : 250 - Teeth : 60TP - Bore : 30 (35 on demand) - Thickness: 3.2

• For cutting hardwoods, double sided veneer and laminate board, MDF, hard paper and thermoplastic boards.
• Extra finish and long cutting life.
• Ideal for working Alucobond,  Parquet laminate flooring.
• For table saws.
• Mitre Saw Table 

Diameter : 300 - Teeth : 96TP - Bore : 30 (35 on demand) - Thickness: 3.2

• For cutting hardwoods, double sided veneer and laminate board, MDF, hard paper and thermoplastic boards.
• Extra finish and long cutting life.
• Ideal for working ALUCOBOND
• For table saws.

"LIMITED OFFER"

CUTTER WOOD PARQUET.

Big cutting capacity.

High precision portable tiltable mitre saw. Big cutting capacity, up to 160x95 mm or 200x45 mm. Head can be tilted from 0° to 45°. Equipped with upper table. Integral safety system with saw blade brake and protection against intempestive switch on. Connection for external dust collection.

With precission laser.

Includes shut-off button for easy change of saw disc. No noise from gears: belt transmission with safety tension.

Specifications:

• Double insulation  
• Input power: 1.500 W
• No-load speed: 3.700/min
• Saw blade diameter: 300 mm
• Weight: 20 Kg

Cutting capacity: 

• Cutting to 0° x 0° 160x95 mm
• (with supplement 36 mm) ref. 3346388 200x45 mm
• Cutting to 0° x 45° 110x95 mm
• Cutting to 45° x 0° 160x64 mm
• Cutting to 45° x 45° 75x64 mm
• Max. cutting capacity on upper table 55 mm

Standard equipment:

•  1 Ø 300 mm 48 Z saw blades , precission laser, length cutting guide and service keys.
• 1 Ø 300 mm 72 Z Professional Saw blades for cutting across grain of exotic timber and hardwood, single sided veneer, laminate boards and plastic coated materials.

"LIMITED OFFER"

Big cutting capacity.

High precision portable tiltable mitre saw. Big cutting capacity, up to 160x95 mm or 200x45 mm. Head can be tilted from 0° to 45°. Equipped with upper table. Integral safety system with saw blade brake and protection against intempestive switch on. Connection for external dust collection.

With precission laser.

Includes shut-off button for easy change of saw disc. No noise from gears: belt transmission with safety tension.

Specifications:

• Double insulation  
• Input power: 1.500 W
• No-load speed: 3.700/min
• Saw blade diameter: 300 mm
• Weight: 20 Kg

Cutting capacity: 

• Cutting to 0° x 0° 160x95 mm
• (with supplement 36 mm) ref. 3346388 200x45 mm
• Cutting to 0° x 45° 110x95 mm
• Cutting to 45° x 0° 160x64 mm
• Cutting to 45° x 45° 75x64 mm
• Max. cutting capacity on upper table 55 mm

Standard equipment:

•  1 Ø 300 mm 48 Z saw blades , precission laser, length cutting guide and service keys.