Manual | dual mode bandsaw SZ 300

 

Two ways miter cutting (45°-0°- 60°).

New round working table providing precision mitering, yet preventing the sawband to scratch its surface as the cut is completed.

Cast-iron sawframe on twin tapered bearings and ring nut to provide greater stability.

Precision blade-guide with hard metal pads, bearings and anti-corosion treatement.

Two cutting speeds.

Vice with quick lock lever.

Cutting cycle: vice locking of material to cut - the sawband runs as long as the operator holds the gripswitch - manual pull down of the sawframe.

 

TECHNICAL FEATURES AND CUTTING CAPACITY:

 

Machine bed in thick metal works exclusively made by domestic workshops. High level machining and finishing of the parts. Vice and sawframe in cast-iron providing high stability and vibration free cutting.

Side-to-side mobile vice with quick approach lever. New round working table providing precision mitering, yet preventing the sawband to scratch its surface as the cut is completed.

Designed to avoid rust seizure and chips jamming. Mechanical blade tension with handwheel. Precision blade-guide with hard metal pads and roller bearings.

Anti-corrosion treatement with electrolytic nickel-plating and galvanization zinc plating ensure long lasting cutting precision. Electric motor and reduction unit from domestic ISO certificated manufacturers.

Electric installation according CEE. Set of fuses against current overload. Motor protected thermal feeler.

Safety microswitch on the blade protection. Coolant liquid with electropump and crucible.

Severe tests on mechanical tolerances, electric installation and final performance test.

 

STANDARD EQUIPMENT:

 

  • Certificate of conformity and instruction manual according to Machine Directive 2006
  • Set of service spanners.
  • Bar stop.
  • Material support.
  • Bi-metal bandsaw 2750x27x0,9.

 

OPTIONAL EQUIPMENT:

 

DUAL-MODE: sawframe downfeed selection system:

  •     Manual downfeed.
  •     Gravity downfeed with adjustable speed.
  • PNEUMATIC VICE: automatic locking and opening of the vice.
  • Rollerway 2 meters long on loading side (capacity 240 kg).
  • Rollerway 2 meters long on unloading side (capacity 240 kg) with bar stop.
  • Rollerway 2 meters long on loading side (capacity 1000 kg).
  • Rollerway 2 meters long on unloading side (capacity 1000 kg) with bar stop.

 

TECHNICAL SUPPORT:

 

  • Technical support from the local service centre.
  • Spare parts delivery is guaranteed for 10 year from the construction date.

 

TECHNICAL DATA:

 

  • 3Ph Electric motor kW 1.0 - 1.4
  • Electropump kW 0.05
  • Gearbox reduction ratio I 40/1
  • Flywheel diameter mm 300
  • Blade dimension mm 2750 x 27 x 0,9
  • Cutting speed m/1' 33/66
  • Vice opening mm 305
  • Sawframe inclination ° 30
  • Working height mm 980
  • Machine dimension mm 1200 x 2000 x 1950
  • Weight kg 370
8.500,00 €

7.400,00 €

  • 395 kg
  • Limited Availability
  • delivery in 10-25 working days1